美国空气固定源排污许可证中关于监测的规定及启示

监测规定是美国空气固定源运行排污许可证中的核心内容。基于"个案管理"原则,每个运行许可证中的各个产排污单元分别执行不同的监测规定。获得"连续"的监测数据需足够判定固定源排放是否合规,且成本有效。"固定源制定和提交监测方案-管理机关审核-监测方案载入排污许可证中-依方案监测-数据处理-排污许可证守法报告-管理机关合规监测和评估"的系统化监测程序,使得固定源监测更具可操作性,监测数据更规范。建议中国排污许可证制度中建立类似的监测规定。     

Reliability of Indicators of Decline in Abundance

Abstract: Although there are many indicators of endangerment (i.e., whether populations or species meet criteria that justify conservation action), their reliability has rarely been tested. Such indicators may fail to identify that a population or species meets criteria for conservation action (false negative) or may incorrectly show that such criteria have been met (false positive). To quantify the rate of both types of error for 20 commonly used indicators of declining abundance (threat indicators), we used receiver operating characteristic curves derived from historical (1938–2007) data for 18 sockeye salmon (Oncorhynchus nerka) populations in the Fraser River, British Columbia, Canada. We retrospectively determined each population's yearly status (reflected by change in abundance over time) on the basis of each indicator. We then compared that population's status in a given year with the status in subsequent years (determined by the magnitude of decline in abundance across those years). For each sockeye population, we calculated how often each indicator of past status matched subsequent status. No single threat indicator provided error‐free estimates of status, but indicators that reflected the extent (i.e., magnitude) of past decline in abundance (through comparison of current abundance with some historical baseline abundance) tended to better reflect status in subsequent years than the rate of decline over the previous 3 generations (a widely used indicator). We recommend that when possible, the reliability of various threat indicators be evaluated with empirical analyses before such indicators are used to determine the need for conservation action. These indicators should include estimates from the entire data set to take into account a historical baseline.     

基于陶瓷行业脱硫塔管束除雾器流速调控装置的设计研究

目的针对陶瓷行业烟气“超净排放”须达到的标准(颗粒物浓度小于5 mg/Nm3)要求,创新设计管束除雾器流速调控装置结构。方法在脱硫塔管束除雾器流速调控装置的出口末端均匀布置多组调节阀门,根据实际工况烟气量通过调节延伸在塔外的调节杆控制阀门启闭的数量,进而控制通过管束除雾器的总烟气量,实现单筒管束除雾器的筒内流速在设计范围内。结果工作时,整列实现启闭,单列调控可控制最大烟气量达5.7×104 m3/h。当脱硫塔控制进口颗粒物质量浓度小于50 mg/m3时,管束除雾器内筒烟气流速小于5 m/s,颗粒物质量浓度为13~15 mg/m3。当内筒烟气流速处于5~7 m/s时,颗粒物质量浓度为7~10 mg/m3。结论该流速调节装置的使用能确保管束除雾器单筒内的流速不低于设计值,可避免因喷雾塔开停导致工况烟气量波动而影响除雾器的效率。     

基于工况变化的港作拖轮排放特性

利用便携式排放测试系统（PEMS）对一艘港作拖轮船进行了在变工况航行作业下的排放试验,研究了该船舶CO、碳氢化合物（THC）和NO_x的瞬态特性、颗粒物粒径分布特性、主机在不同工况下的排放因子.结果表明：拖轮主机在日常航行工况和不同发动机负荷下,颗粒物排放粒径呈单峰或双峰分布,第一峰值粒径在30~40nm之间,第二峰值粒径为191.1nm;CO和THC在进港返航工况下基于油耗排放因子显著高于其他工况,NO_x、颗粒物（PM）和颗粒物数量（PN）在离港返航时排放因子高于其他工况;各排放污染物在正顶作业时基于距离的排放因子高于其他工况;CO和THC基于功率的排放因子在正顶作业工况下最高,最高值分别为4.10和1.20g/（kW·h）,NO_x、PM、PN排放因子在倒拖作业工况下最高,最高值分别为10.28g/（kW·h）,0.28g/（kW·h）和13.97×10¹⁴个/（kW×h）.     

气候变化对安徽省大气污染扩散能力的影响

利用气象部门整编的30年(1981—2010年)气候资料中,安徽省内35个未搬迁的地面气象站观测资料,分析安徽省大气污染扩散能力的变化特征。时间变化方面,安徽省的不稳定日数比重以每年0.31%的速度增加,大气扩散能力经历了"增强-减弱-增强"的起伏式变化,1997—2004年是扩散能力降低的时期。在空间分布上,除沿江中、西部和皖南山区东部的局部地区出现不稳定日比重下降(安庆站的下降速率最快,为每年-0.32%)的变化趋势外,其他地区均呈逐年升高趋势。高斯扩散模型的模拟结果表明,安徽省的大气污染扩散能力总体上有所增强,在35个台站中,有1/2的台站扩散能力出现了降低的变化趋势。此外,在安徽省淮北东部、大别山西北部和皖南山区东北部,大气的垂直扩散能力得到了增强,水平输送能力有所减弱。沿(长)江西部,大气的垂直扩散能力有所减弱,但水平输送能力却得到增强。     

操作条件对电氧化去除废水中有机污染物的影响研究

为优化电催化氧化操作条件、降低能耗,考察了电解温度、直流电源电流密度、方波脉冲电源频率、占空比等工艺控制参数对苯酚模拟有机废水COD去除率的影响。同时,以水杨酸为羟基自由基(·OH)捕捉剂,通过高效液相色谱分析技术对不同电氧化操作条件下·OH的生成量进行间接检测。结果发现,苯酚溶液的COD去除率随电解温度的升高而下降,随电流密度的增大而升高;随着脉冲频率与占空比的增加,苯酚溶液COD去除率均呈现先升高后下降的规律,在脉冲频率为500Hz、占空比为50%时达到最高。操作条件对·OH生成量的影响与其对苯酚溶液COD去除率的影响规律一致,表明操作条件通过影响生成及进入到电解体系中的·OH量从而影响电氧化效率。比较发现,脉冲电源的单位COD处理能耗相比直流电源降低44%,具有明显节能效果。     

Extension of TACOM to the complexity of tasks designed for abnormal situations in nuclear power plants

TACOM (TAsk COMplexity) is a measure for evaluating the complexity of tasks prescribed for emergency situations in nuclear power plants. Five sub-measures constituting TACOM represent five different aspects of the task complexity exhibited in operating procedures for emergency situations. The practicality of TACOM has been verified through a series of empirical studies. However, tasks designed for abnormal situations that can significantly affect the safety of nuclear power plants, also need a proper measure for evaluating their complexity. TACOM provides a process, a systematic cognitive task analysis method and a set of guidelines to support its application. Therefore, although the characteristics of abnormal task situations are not the same as those of emergency situations, TACOM seems to be reasonably applied to abnormal situations or at least to offer meaningful insights for developing a measure for evaluating the complexity of tasks in abnormal situations. Thus this study examined the applicability of TACOM to abnormal situations through case studies. Particular attention was paid to the sufficiency and appropriateness of the three methodological tools, which are the process, the cognitive task analysis method and the set of guidelines. Collective consideration of the case studies and the characteristics of tasks prescribed for abnormal situations led us to draw the conclusion that TACOM could be reliably used for abnormal situations as well. This paper reports the process of how to apply TACOM to the tasks of abnormal situations and discusses some lessons learned through this application.     

地铁运营工况点型探测器探测性能试验研究

为了解地铁运营期点型探测器受活塞风的影响及其适应性和设置方式,采用碎纸、棉绳和聚氨酯塑料试验火,在地铁站台进行初期火灾探测实体试验。对2种类型点型探测器在模拟运营工况与夜间停运工况的适应性进行对比分析,同时,针对设置镂空格栅吊顶地铁车站,研究点型探测器在吊顶上下不同安装位置时的响应性能。试验结果表明:列车运行产生的活塞风扰乱烟气的上升和扩散运动,对阴燃火源烟气影响显著,有烟明火烟气能较快地通过格栅空隙到达中板;在地铁运营工况条件,烟温复合探测器响应性能表现不理想,不同空间安装的点型感烟探测器报警时间与报警数量均较停运工况发生变化。设置镂空格栅吊顶车站站台层公共区运营期使用点型感烟探测器进行保护时,应当贴中板和贴格栅吊顶双层安装。     

一种求解地下结构顶板频率和振型的方法

采用欧拉梁横向自由振动理论,发展了一种求解浅埋地下结构顶板频率和振型的方法.鉴于地下结构顶板频率求解问题的复杂性,首先将该问题假定为平面应变问题求解,推导出浅埋地下结构顶板梁的自由振动方程;然后根据顶板梁的边界条件,得到了顶板梁的频率方程,从而得出了顶板梁的频率和振型;进一步得出了墙体转动刚度对顶板频率影响的规律,即转...     

An evaluation approach using a HARA and FMEDA for the hardware SIL

Safety instrumented systems (SIS) are becoming increasingly complex, and form a growing proportion of programmable electronic parts. The IEC 61508 global standard was established to ensure the functional safety of SIS; however, it was expressed in highly macroscopic terms. The safety integrity level (SIL) is a criterion describing whether a component meets the safety requirements of a SIS. The safety requirements give a target SIL for the expected risks using hazard analysis and risk assessment (HARA). The SIL must correspond to the safety requirements. This study introduces an evaluation process for determining the hardware SIL through failure modes, effects, and diagnostic analysis (FMEDA). First, the components of the SIS subsystem are defined in terms of failure modes and effects, and then the failure rate and failure mechanism distribution are assigned to each component. The safety mode and detectability of each failure mode are determined for each component and, finally, the hardware SIL is evaluated. We perform a case study to evaluate the hardware SIL of the flame scanner system using HARA and FMEDA, where the safety requirement of the flame scanner was determined using the risk graph method. We verified that the hardware SIL of the flame scanner corresponded to the safety requirement.